SPECIFICATIONS
40 eng
Capacities
Model HP565
Crankcase Oil Capacity with New Filter
1.
7.6 L (8 U.S. qts)
Bravo ‑ Drive Unit Oil Capacity (with Monitor)
2.65 L (2.8 U.S. qts)
Bravo III XR ‑ Drive Unit Oil Capacity (with Monitor)
2.8 L (3 U.S. qts)
Closed‑Cooling System 13 L (14 U.S. qts)
General Engine Specifications
Crankshaft horsepower
1.
388 kW, 520 HP
Displacement 8.57 L (523 cid)
Cylinder arrangement V8
Bore 116 mm (4.560 in.)
Stroke 102 mm (4.00 in.)
Compression ratio 8.6:1
Alternator 95 amp/1238 watt
Battery requirements Group 31M, 1150 CCA (minimum)
Electrical system 12‑volt negative (–) ground
Ignition type PCM distributorless, wasted spark
Spark plug type NGK BKR6ES
Spark plug gap 0.9 mm (0.035 in.)
Fuel system
Sequential port electronic fuel
injection
Emission control system Electronic engine control (EC)
Length of Bravo engine package
(transom mount to front of engine)
869 mm (34.2 in.)
Width 843 mm (33.2 in.)
Height (bottom of oil pan to highest
part of the engine which could be the
exhaust system)
843 mm (33.2 in.)
Weight 552 kg (1218 lb)
1. Always use a dipstick to determine exact quantity of oil required.
1. Kilowatts/horsepower rating is in compliance with the SAE J1228/ISO 3046 Standard.
Usable power will be reduced by gear losses.