STORAGE
SECTION 6
Page 98 CMD-3967823 / 90-865237030 OCTOBER 2003
5. Perform all lubrication and maintenance specified for completion Annually in Section
5 - Maintenance Schedule, except items that were performed at time of engine layup.
6. Fill fuel tanks with fresh diesel fuel. Old fuel should not be used. Check fuel lines and
connections for leaks and general condition.
7. Replace fuel filter.
CAUTION
When installing battery, connect POSITIVE (+) battery cable to POSITIVE (+) battery
terminal FIRST, and NEGATIVE (–) battery cable to NEGATIVE (–) battery terminal
LAST. If battery cables are reversed, or connection order is reversed, electrical
system damage will result.
8. Install a fully charged battery. Clean the battery cable clamps and terminals. Reconnect
the cables (see CAUTION listed above). Secure each cable clamp when connecting.
9. Coat terminals with a battery terminal anti-corrosion spray to help retard corrosion.
Description
Where Used Part Number
Anti-corrosion spray Battery terminals Obtain Locally
To Next Page
Loading...
Need help?
General