Heated Throttle Grip
Some models include a heated throttle grip for comfortable cold‑weather
operation. The control for the heater is at the pivot end of the tiller handle. The
heater has three heat settings. Three LEDs illuminate to indicate the current
setting. Pressing the button cycles through the settings:
• Low heat, indicated by a single LED
• Medium heat, indicated by two lit LEDs
• High heat, indicated by three lit LEDs
• Heater off, indicated by no lit LEDs
a - Tiller handle pivot
b - Throttle grip heater
button
c - High setting LED
d - Medium setting LED
e - Low setting LED
The heating element may take a few minutes before heat is felt through the
grip.
If the battery charge is too low, the heater will automatically shut off to preserve
starting power.
FEATURES AND CONTROLS
14 eng
To Next Page
Loading...
