STORAGE
90 eng
• Touch up any paint nicks. See your dealer for touch‑up
paint.
• Spray Quicksilver or Mercury Precision Lubricants Corrosion
Guard on external metal surfaces (except corrosion control
anodes).
Tube
Ref No.
Description Where Used Part No.
120
Corrosion
Guard
External metal surfaces 92-802878 55
Gearcase
• Drain and refill the gearcase lubricant (refer to Gearcase
Lubrication).
Positioning Outboard for Storage
Store outboard in an upright (vertical) position to allow water to
drain out of the outboard.
NOTICE
Storing the outboard in a tilted position can damage the
outboard. Water trapped in the cooling passages or rain water
collected in the propeller exhaust outlet in the gearcase can
freeze. Store the outboard in the full down position.
Battery Storage
• Follow the battery manufacturer's instructions for storage
and recharging.
• Remove the battery from the boat and check water level.
Recharge if necessary.
• Store the battery in a cool, dry place.
• Periodically check the water level and recharge the battery
during storage.
To Next Page
Loading...
Need help?
General
