To Next PageTo Next Page
Need help?Do you have a question about the Mercury 125 and is the answer not in the manual?
General| Brand | Mercury |
|---|---|
| Model | 125 |
| Category | Outboard Motor |
| Language | English |
Information on transferring the limited warranty to a subsequent purchaser.
Process for registering a second owner and retaining unused warranty.
Details on how to register the product for warranty coverage.
Process for registering the product sold outside the US and Canada.
Details the coverage, duration, and conditions of the limited warranty.
Instructions for obtaining warranty service and customer responsibilities.
Details the 3-year warranty against corrosion failure for engines.
Excludes implied warranties and limits liability for damages.
Operator's responsibility for safe operation of boat and occupants.
Instructions to read the manual and understand safety information before use.
Guidance on not overpowering or overloading the boat.
Explanation of the lanyard stop switch purpose and operation.
Safety guidelines for passengers on pontoon and deck boats.
Advice on reducing injury from striking underwater objects.
Information on carbon monoxide poisoning from exhaust fumes.
General recommendations for safe boating practices and regulations.
Instructions for correctly installing the outboard motor.
Specifies the maximum acceptable mounting height for the outboard.
Instructions for safely trailering the boat and outboard.
Recommendations for using unleaded gasoline and its octane rating.
Recommends specific TC-W3 certified oil for the outboard motor.
Mixing ratios for gasoline and oil for oil injection models.
Description of remote control components and their functions.
Explanation of the warning horn and its triggers (overheat/low oil).
Description of the Power Trim and Tilt system and its operation.
Description of the manual tilt system for tilting the outboard.
Instructions for adjusting throttle grip friction on tiller handle models.
Instructions for adjusting steering friction on tiller handle models.
Adjusting trim tabs to compensate for steering torque.
How to set trim angle when running engine at idle speed.
Procedure for flushing and cleaning the outboard after use.
Step-by-step guide for starting the outboard motor.
Instructions for properly breaking in a new outboard engine.
Critical procedure for failures.
Guidelines for keeping the outboard in the best operating condition.
Recommendations for using genuine Mercury or Quicksilver parts.
Schedule for periodic inspections and maintenance tasks.
Instructions for flushing the outboard's cooling system with fresh water.
Major system.
Component maintenance.
Essential maintenance.
Essential maintenance.
Critical maintenance.
Essential maintenance.
Essential maintenance.
Specific condition handling.
Essential storage prep.
Specific storage prep.
Critical troubleshooting.
Critical troubleshooting.
Troubleshooting operational issues.
Troubleshooting operational issues.
Service information.
Contact details for Mercury Marine service offices worldwide.
