Mercury 15 EFI SeaPro - Manual Tilt Features and Operation

• Cooling water intake ‑ The outboard water intake for cooling the engine is
located on both sides of the gear housing. If overheating is encountered,
this area should be inspected first for debris blocking the intake.
63098
Cooling water intake
• Water pump indicator ‑ Water spray from this location indicates the water
pump is pumping cooling water up to the engine. If there is no water
spray, inspect the water intake on the gear housing.
62870
Water pump indicator
Manual Tilt Features and Operation
• Tilt lever ‑ Allows the outboard to be locked into the shallow water drive
position or the full up position. Refer to Basic Tilt Lever Operation.
FEATURES AND CONTROLS
eng 41