Alternator Belt Inspection
Inspect the alternator belt and have it replaced by an authorized dealer if any of
the following conditions are found.
• Cracks or deterioration in the rubber portion of the belt
• Belt surfaces rough or uneven
• Signs of wear on the edges or outer surfaces of the belt
Compressor Air Intake Filter
The filter should be changed every 100 hours of operation, or once a season.
IMPORTANT: Never run the engine without the air filter.
REMOVAL
1. Remove the flywheel cover from the engine.
2. Snap the retainer out of the cover and remove the filter.
a - Retainer
b - Filter
INSTALLATION
1. Install the filter into the cover.
To Next Page
Loading...
