Tube Ref
No.
Description Where Used Part No.
66
Loctite 242
Threadlocker
Stator bolts and ride plate screws 92-809821
Description Nm lb‑in. lb‑ft
Stator bolts 47 – 35
Ride plate screws 8.5 75 –
ADDING OR REFILLING LUBRICANT
a - Fill hole
b - Reverse gate (bottom edge)
c - Rudder (outside diameter)
Fluid Type Capacity
High Performance Gear Lube 562 ml (19 fl oz)
1. Insert the nozzle of the lubricant tube in the fill hole on the stator.
2. Add lubricant until it appears at the hole.
3. Install the plug.
4. Apply Loctite 271 Threadlocker to four nozzle screws. Install the nozzle
assembly and anode. Secure with four screws. Tighten the screws to the
specified torque.
Tube Ref
No.
Description Where Used Part No.
7
Loctite 271
Threadlocker
Nozzle screws 92-809819
To Next Page
Loading...
