MAINTENANCE
62
Removal
or39-1
a
b
c
a - O‑ring seals
b - Filter
c - Raised bosses
1. Disconnect the link rod.
2. Use the shaft of a screwdriver between the filter cap bosses and
unscrew the filter.
Installation
1. Lubricate the o‑ring seals with oil.
2. Install the fuel filter and tighten securely.
3. Reconnect the link rod.
IMPORTANT: Visually inspect for fuel leakage from the filter while
squeezing the primer bulb until firm, forcing fuel into the filter.
To Next Page
Loading...
