MAINTENANCE
74
!
WARNING
The end of the steering cable must be fully retracted into the outboard tilt
tube before adding lubricant. Adding lubricant to steering cable when fully
extended could cause steering cable to become hydraulically locked. A
hydraulically locked steering cable will cause loss of steering control,
possibly resulting in serious injury or death.
Tube Ref No. Description Where Used Part No.
95
2-4-C Marine Lubricant
with Teflon
Steering cable and
grease fitting on belt
tensioner pulley
92-802859A1
110
4 Stroke 10W30
Outboard Oil
Steering cable 92-802833A1
Checking Trim System Fluid Level
!
CAUTION
Avoid possible injury. Oil in the trim system is under pressure when the
outboard is in any position other than the full tilt position. Position the
outboard in the full tilt position before opening the fill cap.