To Next PageTo Next Page
Need help?Do you have a question about the Mercury 225 VERADO and is the answer not in the manual?
General| Horsepower | 225 HP |
|---|---|
| Full Throttle RPM Range | 5800-6400 RPM |
| Steering | Electro-hydraulic power steering |
| Dry Weight | 635 lbs / 288 kg |
| Cylinders | 6 |
| Gear Ratio | 1.85:1 |
| Alternator Output | 70 amp (882 watt) |
| Shaft Length | 20", 25" |
| Starting System | Electric |
| Warranty | 3 years |
| Fuel Induction System | Electronic Fuel Injection (EFI) |
Coverage period and terms for the FourStroke Outboard Limited Warranty.
Details on warranty coverage duration and necessary conditions for eligibility.
Instructions on how customers can obtain warranty service and support.
List of services and damages explicitly excluded from warranty coverage.
Details on the 3-year limited warranty specifically for corrosion failure.
Coverage duration and conditions required for the corrosion warranty.
Service procedures and exclusions specific to the corrosion warranty.
Overview of what is covered and excluded by the warranty.
Common items and services generally excluded from warranty coverage.
Additional general exclusions from the product warranty.
Warnings and safety measures for impacts with underwater obstacles.
Information on exhaust emissions and the risks of carbon monoxide poisoning.
Procedure and safety warnings for installing the outboard motor.
Guidelines for correct outboard mounting height and static waterline.
Guidance on selecting the right propeller for optimal performance.
Guidelines on recommended fuel types, octane ratings, and unleaded fuel.
Procedures for fuel system storage and safely filling the fuel tank.
Guidance on recommended engine oil and how to check the oil level.
Detailed steps for checking and maintaining the engine oil level.
How the Engine Guardian System monitors and protects the engine.
Description of the outboard's power trim and tilt system.
Detailed explanation of how to operate the power trim system.
Guidelines for operating the outboard in shallow water conditions.
Essential checks to perform before starting the engine.
Guidelines for operating in saltwater/polluted water and engine break-in.
Crucial safety precautions to follow before starting the engine.
Step-by-step instructions for starting the engine.
Using ignition key starting and panel mount gear shifting.
Instructions for gear shifting using the console mount control.
Procedure for safely stopping the outboard engine.
General care for the outboard and recommendations for replacement parts.
Scheduled maintenance tasks to be performed before each use.
Maintenance tasks after use and at 100-hour intervals.
Maintenance tasks at 300-hour intervals and storage preparation.
Procedure for flushing the outboard's cooling system.
Steps for flushing the cooling system and removing the cowl.
Specifications and safety guidelines for DTS system batteries.
Safety precautions for the fuel system and fuel line inspection.
Information on the water separating fuel filter and its maintenance.
Steps for removing and draining the fuel filter.
Inspection and maintenance of corrosion control anodes.
Step-by-step instructions for replacing the outboard propeller.
Propeller installation and spark plug inspection.
Procedure for inspecting and setting spark plug gap.
Procedure for checking the power trim fluid level.
