Mercury 225 VERADO User Manual

OPERATION
98
Stopping The Engine
IMPORTANT: Turning key to the "START" position while the
engine is running will result in engine shut down, while leaving the
DTS system active. This will allow the use of the power trim/tilt from
the remote control handle.
Reduce engine speed and shift outboard to neutral position. Turn
ignition key to "OFF" position.
S
T
A
R
T
O
F
F
A
C
C
O
N
S
T
A
R
T
O
F
F
A
C
C
O
N
3482

Mercury 225 VERADO Specifications

General

Horsepower	225 HP
Full Throttle RPM Range	5800-6400 RPM
Steering	Electro-hydraulic power steering
Dry Weight	635 lbs / 288 kg
Cylinders	6
Gear Ratio	1.85:1
Alternator Output	70 amp (882 watt)
Shaft Length	20", 25"
Starting System	Electric
Warranty	3 years
Fuel Induction System	Electronic Fuel Injection (EFI)