Mercury 225 User Manual

MAINTENANCE
86 eng
2. Straighten the bent tabs on the propeller nut retainer.
45016
3. Place a block of wood between the gearcase and propeller
to hold the propeller and remove the propeller nut.
29592
4. Pull propeller straight off the shaft. If the propeller is seized
to the shaft and cannot be removed, have the propeller
removed by an authorized dealer.
5. To aid in future removal of the propeller, liberally coat the
propeller shaft splines with one of the following Mercury/
Quicksilver products:
Tube
Ref No.
Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft splines 92-802867Q 1
95
2-4-C with
PTFE
Propeller shaft splines 92-802859A 1

Mercury 225 Specifications

General

Fuel Induction System	Electronic Fuel Injection (EFI)
Horsepower	225 HP
Steering	Hydraulic Steering
Shaft Length	20"
Starting	Electric Start
Cylinders	V6