FEATURES & CONTROLS
58
TILT DOWN FROM SHALLOW WATER RUNNING POSITION
Turn the reverse lock lever to lock side, lift up the engine slightly,
and put it down. Reverse lock is done automatically.
a - Reverse lock lever
IMPORTANT: While in shallow water drive position, do not operate
the outboard in reverse. Operate the outboard at slow speed and
keep the cooling water intake submerged.
Trim Adjustment
Trim of the motor can be adjusted to suit the transom angle and
loading conditions of your boat. Be sure to maintain the
anti‑ventilation plate parallel to the water level during cruising.
• Correct trim: Maintain the trim position pin perpendicular to
the water level to keep your boat level during cruising.
• Trim down: If the bow rises too high, causing unstable
cruising, trim the trim position pin down.
To Next Page
Loading...
Need help?
General
