Mercury 30 2-Stroke User Manual

OPERATION
69
IMPORTANT: Before starting, read the Pre‑Starting Check List,
Special Operating Instructions, and Engine Break‑in Procedures
in the Operation Section.
2. Tiller handle models: Push the starter button.
3. After the engine starts, release the button.
37524
4. Remote control models: Insert, push, and turn the key to the
START position.
NOTE: When restarting a warm engine, do not push the key;
merely turn it to the start position.
37717
a
b
a - ON
b - START

Mercury 30 2-Stroke Specifications

General

Brand	Mercury
Model	30 2-Stroke
Category	Engine
Language	English