21
CA864
DEALER RESPONSIBILITIES
In general, a dealer’s responsibilities to the customer include predelivery inspection and preparation such as:
• Make sure that the boat is properly equipped.
• Prior to delivery, make certain that the Mercury MerCruiser power package and other equipment are in proper
operating condition.
• Make all necessary adjustments for maximum efficiency.
• Familiarize the customer with the on-board equipment.
• Explain and demonstrate the operation of the power package and boat.
• At the time of delivery, the dealer should provide you with a copy of a Predelivery Inspection Checklist.
• Your selling dealer should fill out the Warranty Registration Card completely and mail it to the factory
immediately upon sale of the new product.
CA865
Freezing Temperature Operation
IMPORTANT: If boat is operated during periods of freezing temperature, precautions must be taken to
prevent freezing damage to power package. Damage caused by freezing IS NOT
covered by Mercury
MerCruiser Limited Warranty.
CA867
Drain Plug and Bilge Pump
The engine compartment in your boat is a natural place for water to collect. For this reason, boats are normally
equipped with a drain plug and/or a bilge pump. It is very important to check these items on a regular basis to
ensure that the water level does not rise to come in contact with your power package. Components on your
engine will be damaged if submerged. Damage caused by submersion is not covered by the Mercury MerCruiser
Limited Warranty.
CA869
Attention Required After Submersion
• Before recovery, contact an Authorized Mercury MerCruiser Dealer.
• After recovery, immediate service by an Authorized Mercury MerCruiser Dealer is required to prevent serious
damage to power package.
To Next Page
Loading...
Need help?
General