Mercury 40 Jet User Manual

OPERATION
57
5. Move the throttle‑only lever to the fully closed position or press
the throttle‑only button.
a
b
a
b
26840
a - Fully closed position
b - Maximum fast idle speed position
6. Starting a flooded engine ‑ Advance the throttle‑only lever or
control handle to the maximum throttle‑only position and
continue to crank the engine for starting. Immediately reduce
engine speed after engine starts.
7. Turn ignition key to the "START" position. If the engine fails to
start in ten seconds, return the key to the "ON" position, wait
30 seconds and try again.
19804
8. After engine starts, check for a steady stream of water flowing
out of the water pump indicator hole.
28521

Mercury 40 Jet Specifications

General

Cylinders	3
Starting	Electric
Steering	Remote
Shaft Length	20 in
Horsepower	40 HP
Alternator Output	226-watt
Warranty	3 years