EasyManuals Logo

Mercury 40 Jet User Manual

Mercury 40 Jet
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
MAINTENANCE
70
2. Bring the front of the cowl down first and engage the front
hook. Lower the cowl into its seated position and apply
downward pressure to the back of the cowl to lock it in place.
Gently pull up on the back of cowl to make sure it is securely
fastened.
28445
Exterior Care
Your outboard is protected with a durable baked enamel finish.
Clean and wax often using marine cleaners and waxes.
Battery Inspection
The battery should be inspected at periodic intervals to ensure
proper engine starting capability.
IMPORTANT: Read the safety and maintenance instructions
which accompany your battery.
1. Turn off the engine before servicing the battery.
2. Add water, as necessary, to keep the battery full.
3. Make sure the battery is secure against movement.
4. Battery cable terminals should be clean, tight, and correctly
installed. Positive to positive and negative to negative.
5. Make sure the battery is equipped with a non‑conductive
shield to prevent accidental shorting of battery terminals.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 40 Jet and is the answer not in the manual?

Mercury 40 Jet Specifications

General IconGeneral
Cylinders3
StartingElectric
SteeringRemote
Shaft Length20 in
Horsepower40 HP
Alternator Output226-watt
Warranty3 years

Related product manuals