Mercury 40 Jet User Manual

OPERATION
59
3. Position the fuel line primer bulb so the arrow on the side of
the bulb is pointing up. Squeeze the fuel line primer bulb
several times until it feels firm.
27348
4. Set the lanyard stop switch to "RUN" position. Refer to
General Information ‑ Lanyard Stop Switch.
19791
5. Shift outboard to neutral ("N") position.
N
28522
6. Set the throttle grip to start position.
7. Starting a flooded engine ‑ Set the throttle grip to half‑way
position.
ART
0%100
START
ST
0%100
START
START
a
b
19799
a - Start position
b - Half‑way position

Mercury 40 Jet Specifications

General

Cylinders	3
Starting	Electric
Steering	Remote
Shaft Length	20 in
Horsepower	40 HP
Alternator Output	226-watt
Warranty	3 years