• Co‑Pilot Shaft (Tiller Handle Models) ‑ Lubricate through fitting. Move
the steering friction lever back and forth while lubricating.
a - Tilt Tube
b - Co‑pilot shaft
• Lubricate threads of transom clamp screws (if equipped).
• Shift Handle (Tiller Handle Models) ‑ Lubricate through fittings.
3091
• Steering Cable Grease Fitting (If equipped) ‑ Rotate steering wheel to
fully retract the steering cable end into the outboard tilt tube. Lubricate
through fitting.
3089
a
b
a
MAINTENANCE
eng 71
To Next Page
Loading...
