Mercury 40 SeaPro - Lubrication Points

Description Nm lb‑in. lb‑ft
Spark plug 27 – 20
Lubrication Points
1. Lubricate the following with Quicksilver or Mercury Extreme Grease or
2‑4‑C with PTFE.
Tube Ref
No.
Description Where Used Part No.
Extreme Grease Propeller shaft 8M0071842
95
2-4-C with PTFE Propeller shaft 92-802859A 1
•
Propeller Shaft ‑ Refer to Propeller Replacement for removal and
installation of the propeller. Coat the entire propeller shaft with
lubricant to prevent the propeller hub from corroding and seizing to the
shaft.
26902
2. Lubricate the following with Quicksilver or Mercury 2‑4‑C with PTFE.
Tube Ref
No.
Description Where Used Part No.
95
2-4-C with PTFE
Swivel bracket, tilt tube, co-pilot shaft,
transom clamp screws, shift handle,
steering cable grease fitting
92-802859A 1
• Swivel Bracket ‑ Lubricate through fitting.
27580
• Tilt Tube ‑ Lubricate through fitting.
MAINTENANCE
70 eng