38
CD617
Routine Maintenance
Each
Day
Start
Each
Day End
Weekly
Every
Two
Months
Check drive unit oil level, trim pump oil level and power steering
pump fluid level.
Check water pickups for debris or marine growth. Check water
strainer and clean. Check coolant level.
Inspect drive unit anodes and replace if 50 percent eroded.
Lubricate propeller shaft and the retorque nut (if operating in only
freshwater, this maintenance may be extended to every four
months).
Scheduled Maintenance
Every
100
hours or
Annually
Every
200
hours or
3
years
Every 2
years
Every 5
years
Every
500
hours or
5
years
Every
1000
hours or
5
years
Touch-up paint power package and spray
with corrosion guard.
Change drive unit oil and retorque
connection of gimbal ring to steering shaft.
Inspect and lubricate U-joints and splines;
inspect bellows and clamps. Check engine
alignment.
Lubricate gimbal bearing
Check continuity circuit for loose or dam-
aged connections. Test MerCathode unit
output on Bravo Models.
Whichever Occurs First
To Next Page
Loading...
Need help?
General