EasyManuals Logo

Mercury Bravo One Series User Manual

Mercury Bravo One Series
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
45
CB725
Bravo Two
Bravo One
1
2
75492
70561
75086
CB421
Propellers (Bravo One and Two)
WARNING
Avoid Injury: Remote Control must be in NEUTRAL and ignition key removed from switch before
removing and/or installing propeller.
WARNING
Avoid Injury: Place a block of wood between anti-ventilation plate and propeller to protect hands from
propeller blades and to prevent propeller from rotating when removing propeller nut.
CAUTION
Avoid Injury: Periodically check propeller nut for tightness during boating season. A minimum of 55
lbs. ft. (75 N.m) torque is required.
CA78
REMOVAL
1 Place wood block between propeller blade and anti-ventilation plate to prevent rotation. Straighten bent tabs
on tab washer.
2 Turn propeller shaft nut counterclockwise to remove nut.
3 Slide tab washer, spline washer, continuity washer, propeller and thrust hub off propeller shaft.
CA79
REPAIR
Some damaged propellers can be repaired. See your dealer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury Bravo One Series and is the answer not in the manual?

Mercury Bravo One Series Specifications

General IconGeneral
BrandMercury
ModelBravo One Series
CategoryEngine
LanguageEnglish

Related product manuals