44
CD464
1
3
70558
70559
CA525
Drive Unit and Transom Assembly
1 Lubricate gimbal bearing by applying approximately 8-10 pumps of grease from a typical hand-operated
grease gun using Quicksilver U-Joint and Gimbal Bearing Grease.
2 For propeller shaft lubrication, see PROPELLER.
CB776
Engine Coupler
3 Lubricate engine coupler splines through grease fittings on coupler by applying approximately 8-10 pumps
of grease from a typical hand-operated grease gun using Quicksilver Engine Coupler Spline Grease. If boat is
operated at idle for prolonged periods of time, couple should be lubricated every 50 hours.
To Next Page
Loading...
