11
3-4 Shutter Button
●
This camera is designed for 2-step shutter function. A "[ ]" mark will appear
in the center of the LCD monitor when the Shutter button is pressed and held
half way down. The camera will beep after the Shutter button is pressed
down fully; then release the Shutter button to take a picture.
3-5 Mode Selection
●
Please press and hold ” ” button for 2 seconds to enter mode
selection menu including “Play Mode” “Setup Mode”
“Movie Mode” “Capture Mode" "Function Selection”
.
。
3-6 Function Key
●
You can perform different operations in the different mode by using the
Function Key, e.g. select, go up/down and move.
3-7”SET” Button
●
This key is used for SELECTION/SET UP under selection menu
This key is also flash button under capture mode.
To Next Page
Loading...
Need help?
General