29
battery power indicator turns red) the camera would automatically turn off.
●Slide the battery cover open in the direction indicated by the arrow.
●Insert the batteries according to the indication on the inner side of the
cover.
● Close and lock the battery cover.
NOTE: Do not open the cover roughly to avoid damaging the battery
compartment cover.
※ If the battery power indicator only shows one black block, the flash light
would be disabled.
※ When the battery indicator turns red, recording of still pictures and movies
would be disabled.
※ The Date/Time would be stored for approximately 3 minutes during
battery change. However, double-check the correct Date/Time after the
new batteries have been inserted.
5-3 Loading and Removing the Memory Card
●Turn off the power of the camera first.
1. Loading the Memory Card ●Memory card insertion diagram.
●Insert the memory card according to the indicated arrow.
2. Removing the Memory Card ● Press the memory card down gently first.
● The memory card would pop up automatically. Remove the memory card
according to the indicated arrow.
Attention:
To Next Page
Loading...
Need help?
General