Storage
90-860174050 JUNE 2005 Page 63
a
6131
a - Check valve (if equipped)
Multi‑Point Drain (MPD) System
1. Place the boat on a level surface to ensure complete draining of the system.
2. Remove the blue drain plugs from the following locations. It may be necessary to clean
out the drain holes using a stiff piece of wire. Do no until the entire system is drained.
a. Port and starboard side of cylinder block
b. Bottom of exhaust manifolds
10226
M110050
93235672
b
a
a
b
6129
a - Cylinder block drain plug b - Exhaust manifold drain plug
c. Water circulating pump hose
a
6143
a - Drain plug
To Next Page
Loading...
