Chapter 2
Motherboard Installation
To install this motherboard in a system, please follow the
instructions in this chapter:
Identify the motherboard components
Install a CPU
Install one or more system memory modules
Verify that all jumpers or switches are set correctly
Install the motherboard in a system chassis (case)
Connect any extension brackets or cables to
headers/connectors on the motherboard
Install any peripheral devices and make the appropriate
connections to headers/connectors on the motherboard
Note:
1. Before installing this motherboard, make sure jumper
CLEAR_CMOS1 is under Normal setting. See this chapter for
information about locating CLEAR_CMOS1 and the setting
options.
2. Never connect power to the system during installation;
otherwise, it may damage the motherboard.
To Next Page
Loading...
Need help?
General
