GENERAL SYSTEM DIAGNOSTICS SERVICE MANUAL NUMBER 23
Page 5E-24 90-861326--1 MARCH 1999
THESE NOTES APPLY TO FOLLOWING ECM CONNECTOR AND SYMPTOM CHARTS.
The “B+” Symbol indicates a system voltage (battery).
NOTE: 1: Battery voltage for first two seconds, then 0 volts.
NOTE: 2: Varies with temperature.
NOTE: 3: Varies with manifold vacuum.
NOTE: 4: Varies with throttle movement.
NOTE: 5: Less than .5 volt (500 mV).
Downloaded from https://needmanual.com/!
To Next Page
Loading...
