16
Motherboard User’s Guide
J5: USB Card Reader Header (optional)
This header is for connecting internal USB card reader. You can
use a card reader to read or transfer files and digital images to
your computer.
Note1: The J5 is shared with the lower USB port located
beside the VGA port of the I/O back panel. Please see “I/O
Ports” for more information.
Note2: Please check the pin assignment of the cable and the
USB header on the motherboard. Make sure the pin
assignment will match before plugging in. Any incorrect usage
may cause unexpected damage to the system. The vendor
won’t be responsible for any incidental or consequential
damage arising from the usage or misusage of the purchased
product.
Pin Signal Pin Signal
1 VCC5 2 USB -
3 USB+ 4 GND
5 KEY
To Next Page
Loading...
Need help?
General
