30
Motherboard User’s Guide
Load Optimal Settings
If you select this item and press Enter a dialog box appears. If
you press Y, and then Enter, the Setup Utility loads a set of fail-
safe default values. These default values are not very demanding
and they should allow your system to function with most kinds of
hardware and memory chips.
Note: It is highly recommended that users enter this option to
load optimal values for accessing the best performance.
Load Best Performance Settings
If you select this item and press Enter a dialog box appears. If
you press Y, and then Enter, the Setup Utility loads a set of best-
performance default values. These default values are quite
demanding and your system might not function properly if you are
using slower memory chips or other low-performance compo-
nents.
Features Setup Page
This page sets up some parameters for peripheral devices con-
nected to the system.
AMIBIOS SETUP – Features Setup
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
OnBoard Serial PortA 3F8h/COM1
OnBoard Parallel Port 378
Parallel Port Mode ECP
Parallel Port IRQ 7
Parallel Port DMA 3
OnBoard IDE Both
OnBoard LAN Enabled
Audio Device Enabled
Modem Device Auto
USB Controller Enabled
USB Function for DOS Disabled
ThumbDrive Support
For DOS Disabled
ESC:Quit :Select Item
F1:Help PU/PD/+/-:Modify
F5:Old Values (Shift)F2:Color
F6:Load Optimal Values
F7:Load Best Performance Values
Auto
To Next Page
Loading...
