Mercury Sable 1999 User Manual

not available (one or both of your original keys were
lost or stolen), you must bring your vehicle to your
dealership to have the spare SecuriLocky key(s)
programmed.
Procedure to program spare SecuriLockY keys
to your vehicle
New SecuriLocky keys must have the correct
mechanical key cut for your vehicle.
Conventional (non-SecuriLocky) keys cannot be
programmed to your vehicle.
You will need to have two previously programmed
SecuriLocky keys and the new unprogrammed
SecuriLocky key readily accessible for the
procedure. Please read and understand the entire
procedure before you begin.
1. Insert the first previously programmed
SecuriLocky key into the ignition and turn the
ignition from OFF to RUN (maintain ignition in RUN
for at least one second).
2. Turn ignition to OFF and remove the first
SecuriLocky key from the ignition.
3. Within five seconds of turning the ignition to OFF,
insert the second previously programmed
SecuriLocky key into the ignition and turn the
ignition from OFF to RUN (maintain ignition in RUN
for at least one second but no more than 5 seconds).
4. Turn the ignition to OFF and remove the second
SecuriLocky key from the ignition.
5. Within 10 seconds of turning the ignition to OFF,
insert the unprogrammed SecuriLocky key (new
key/valet key) into the ignition and turn the ignition
from OFF to RUN (maintain ignition in RUN for at
least one second). This step will program your new
SecuriLocky key.
6. To program additional SecuriLocky key(s), repeat
this procedure from step 1.
Controls and features
68

Mercury Sable 1999 Specifications

General

Brand	Mercury
Model	Sable 1999
Category	Automobile
Language	English