Increasing speed while using speed control
There are three ways to set a higher
speed:
• Press and hold the SET ACC
control until you get to the
desired speed, then release the
control.
• Press and release the SET ACC
control to operate the Tap-Up
function. Each tap will increase the set speed by 1.6 km/h (1 mph).
• Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed press and release the SET ACC control.
Reducing speed while using speed control
There are three ways to reduce a
set speed:
• Press and hold the CST control
until you get to the desired
speed, then release the control.
• Press and release the CST control
to operate the Tap-Down
function. Each tap will decrease
the set speed by 1.6 km/h (1 mph).
• Depress the brake pedal until the
desired vehicle speed is reached,
press the SET ACC control.
2004 Sable (sab)
Owners Guide (post-2002-fmt)
USA English (fus)
Driver Controls
52
To Next Page
Loading...
Need help?
General
