High-mount brakelamp (sedan)
The high-mount brakelamp is
located on the rear of your vehicle.
The brakelamp will be mounted
with two fastener clips and an
assembly cover on the package
tray.
1. Remove the push pins and cover
from the package tray.
2. Detach the socket from the
housing and remove the bulb.
3. Replace the bulb and ease the
socket back into the housing.
4. Replace the housing cover and
secure with the push pins.
Liftgate lamp (wagon)
The wagon liftgate lamp is located
on the rear of the vehicle. Follow
these steps to replace the liftgate
lamp bulb:
1. Open the liftgate.
Maintenance and care
164
To Next Page
Loading...
