Mercury Tracer 1997 User Manual

Ford recommends you attach
tethered safety seats in a rear
seating position with the tether
strap attached to the tether
anchoring bracket as shown in the
instructions provided with the
tether anchor kit.
If a tethered seat must be installed
in the front passenger seat:
1. Install the child safety seat in
the front passenger seat. For
instructions on how to install the
seat, refer to Installing child
safety seats in combination lap
and shoulder belt seating
positions in this chapter.
2. Hook the tether strap clip to the
tongue of the rear center lap belt
and ensure that the belt is pulled
tight.
To install a child safety seat using
a tether strap in the back seat:
1. Install the child safety seat in
the rear right, left or center seat
position. For instructions on how
to install the seat, refer to
Installing child safety seats in
lap belt seating positions in this
chapter.
• Sedan
Seating and safety restraints
73

Mercury Tracer 1997 Specifications

General

Brand	Mercury
Model	Tracer 1997
Category	Automobile
Language	English