05
Chapter 2 Installation Guide
2.3 Driver Installation
The following instructions take Windows 10 as an example. The steps may vary
slightly from other versions of Windows.
1. Insert the CD and run the Autorun.exe.
Tip:
You can also check the new release and download the driver at www.mercusys.com/support.
2. Install the Wi-Fi and Bluetooth drivers.
a. Wi-Fi: Click and follow the onscreen instructions to complete the Wi-Fi
installation.
b. Bluetooth: Click and follow the onscreen instructions to complete the Wi-
Fi installation.
Note:
DO NOT run the driver installations at the same time. When one driver is being installed, please wait
until the installation is complete and then try to install the other.
To Next Page
Loading...