English
1
Plug and Play
A B
1. Connect the adapter to a LAN port of your router using an Ethernet cable.
2. Plug the extender into the wall outlets on the same electrical circuit.
3. Wait until the Power LED on any powerline device turns solid green.
4. Connect to the Wi-Fi using the SSID and password on the product label.
5. Enjoy!
More: To add additional Powerline adapters and extenders with the default
settings, simply plug them into the wall outlets on the same electrical circuit.
Internet
WAN LAN
Adapter Extender
Powerline
To Next Page
Loading...
