Need help?Do you have a question about the Mercusys ME10 and is the answer not in the manual?
General| Type | Network repeater |
|---|---|
| WPS push button | Yes |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Maximum transfer distance | - m |
| Wi-Fi band | Single-band (2.4 GHz) |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Cabling technology | 10/100Base-T(X) |
| Security algorithms | WPA-PSK, WPA2-PSK |
| Ethernet LAN (RJ-45) ports | 1 |
| Product color | White |
| Power consumption (typical) | 3.2 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 36 mm |
|---|---|
| Width | 60 mm |
| Height | 101 mm |
Connects the extender to the internet using a web browser interface by following setup wizard steps.
Connects the extender to the internet using the WPS button for a quick and secure connection.
Allows extending to another host network or changing the extended network's SSID and password.
Permits or blocks specific devices from accessing the network using a blacklist or whitelist.
Configures the extender to operate in Access Point mode, creating a wireless network from a wired source.
Provides instructions to download and install the latest firmware for the extender.
Guides on backing up, restoring, or resetting the extender's configuration settings.
To Next Page
