Mercusys ME10 User Manual

17
Chapter 4 Use Your Extender as an Access Point
Chapter 4 Use Your Extender as an Access Point
The extender can work as an access point, transforming your existing wired network
to a wireless one.
Wired Router Extender Devices
Ethernet4Ethernet3Ethernet1Ethernet2Internet
Ethernet4
Ethernet
Internet
4.1 Set Up the Extender as an Access Point
1. Connect your computer to the extender via an Ethernet cable.
2. Visit http://mwlogin.net, and log in with the password you set for the extender.
3. Click Change Mode in the top right corner of the page. Select Access Point Mode
and click OK. The extender will reboot and switch to Access Point mode.
4. Visit http://mwlogin.net, and log in with the password you set for the extender.
5. Go to Settings > Quick Setup to congure your extender.
1 ) Customize your wireless SSID and password and click NEXT.

Mercusys ME10 Specifications

General

Type	Network repeater
WPS push button	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Maximum transfer distance	- m
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Security algorithms	WPA-PSK, WPA2-PSK
Ethernet LAN (RJ-45) ports	1
Product color	White
Power consumption (typical)	3.2 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	36 mm
Width	60 mm
Height	101 mm