Mercusys ME10 User Manual

09
Chapter 3 Customize Your Network
Chapter 3 Customize Your Network
This chapter guides you on how to congure network settings that are available for
this extender.
3.1 Check Internet Status
You can view the internet status of your extender to check whether you have
successfully set up the extended network.
1. Visit http://mwlogin.net, and log in with the password you set for the extender.
2. Go to Network Map to view the internet status of your extender.
• The extender runs normally.
• The extender fails to connect to the host network. Please go to Wireless >
Connect to Host Network to check whether the host network password is
correct. If the problem still exists, relocate the extender closer to the router
to achieve better signal quality.
• The extender is connected to the host network, but is not transmitting data.
Please check the internet connection of your router.
• The extender is connected to the router abnormally. Please go to Settings >
Network and try setting your extender to obtain an IP address automatically.

Mercusys ME10 Specifications

General

Type	Network repeater
WPS push button	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Maximum transfer distance	- m
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Security algorithms	WPA-PSK, WPA2-PSK
Ethernet LAN (RJ-45) ports	1
Product color	White
Power consumption (typical)	3.2 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	36 mm
Width	60 mm
Height	101 mm