Mercusys ME10 - Configure Wireless Network

10
Chapter 3 Customize Your Network
Click the icon of the Internet/Router/Range Extender/Clients to view corresponding
information.
3.2 Congure Wireless Network
If you want to extend another host network after Quick Setup, you can refer to this
section. Moreover, you can change the wireless settings for your extended network.
Visit http://mwlogin.net, and log in with the password you set for the extender.
• To extend another host network:
1. Go to Wireless > Connect to Host Network.
2. Click WIRELESS SCANNER to nd all available networks, then select the 2.4 GHz
host network you want to extend.
Note:
If the network you want to extend is on but not listed, please try the following steps.
· Move the extender closer to your router, and try again.
· Manually enter the SSID (network name) and password of the network you want to extend.
3. Once a host network is selected, the SSID and security type will be automatically
lled in. If the selected network is encrypted, enter the password in the Password
eld.
4. Click SAVE.
• To change the extended network name (SSID):
1. Go to Wireless > Extended Network.