Mercusys ME10 User Manual

11
Chapter 3 Customize Your Network
2. Create a new SSID in Extended 2.4GHz SSID or click COPY HOST SSID. The value
is case-sensitive.
3. Click SAVE.
Note:
If you have changed the wireless settings via a wireless device, you will be disconnected after the settings are
applied. Please write down the new SSID for future use.
• To hide the SSID of the extended network:
1. Go to Wireless > Extended Network.
2. Select Hide SSID broadcast, and the corresponding SSID will not be displayed
when wireless devices scan for local wireless networks. You need to manually
enter the SSID to join the network.
3. Click SAVE.
3.3 Change LAN Settings
The extender is preset with a default LAN IP 192.168.0.254, with which you can log
in to the web management page. The LAN IP address, together with the Subnet
Mask, also denes the subnet that the connected devices are on. If the IP address
conflicts with another device on your local network or your network requires a
specic IP subnet, you can change it.
1. Visit http://mwlogin.net, and log in with the password you set for the extender.
2. Go to Settings > Network > LAN Settings.
3. Select Use the following IP address.

Mercusys ME10 Specifications

General

Type	Network repeater
WPS push button	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Maximum transfer distance	- m
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Security algorithms	WPA-PSK, WPA2-PSK
Ethernet LAN (RJ-45) ports	1
Product color	White
Power consumption (typical)	3.2 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	36 mm
Width	60 mm
Height	101 mm