Mercusys ME10 - Back up and Restore Configuration Settings

24
Chapter 5 Manage the Extender
1. Visit http://mwlogin.net, and log in with the password you set for the extender.
2. Go to Settings > System Tools > Backup & Restore.
• To back up conguration settings:
Click BACK UP to save a copy of the current settings to your local computer. A ‘.bin’
le of the current settings will be stored on your computer.
• To restore previous settings from a saved le:
1. Click BROWSE to locate the backup configuration file stored on your computer,
and click RESTORE.
2. Wait a few minutes for the restore and reboot.
Note: During the restore process, do not power o or reset the extender.
• To reset the extender to factory default settings:
1. Click FACTORY RESTORE to reset the extender.