English
3
Copy Wi-Fi Settings from Router to Extender
1. Press your router’s WPS button.
2. Within 2 minutes, press the Wi-Fi button on the extender for 1 second.
3. The extender’s LED should start blinking orange quickly. When it turns solid green,
Wi-Fi settings are copied. It's done!
LED Description
Status Indication
Solid Green The powerline device is on.
Blinking Green
Blinking quickly: The powerline device is booting. Or pairing is in process.
Blinking slowly: The powerline device is not paired.
Solid Orange The Wi-Fi is o.
Blinking Orange Wi-Fi Clone or Wi-Fi Move is processing.
O The powerline device is o. Or Power-Saving Mode is on (the extender excluded).
WPS
To Next Page
Loading...
