Mercusys MW300UH - Connect to a Wireless Network; Windows 10;8.1;8;7 Connection; Windows XP Connection

Chapter 3 - Connect to a Wireless Network
4
Chapter 3.
Connect to a Wireless Network
With both the hardware and software successfully installed into your computer, you can quickly
connect to a wireless network via Windows wireless utility.
Follow the instructions in the appropriate section below to use your computer system’s built-in
wireless utility: Windows10/8.1/8/7, Windows XP.
3.1 Windows 10/8.1/8/7
1. Click the wireless icon
,
or on the taskbar. Select the wireless network you want to
join and then click Connect. Enter your Wi-Fi password when prompted.
2. When Connected displays next to the network name (SSID) on the screen, it indicates a
successful network connection.
3.2 Windows XP
1. Right-click on the wireless computer icon in your taskbar (lower-right corner). Select View
Available Wireless Networks.
2. Select the network you want to join and click Connect. Then enter your Wi-Fi password when
prompted.