Mercusys MP500 KIT - User Manual

Specications are subject to change without notice. is a registered trademark of
MERCUSYS TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or
registered trademarks of their respective holders.
No part of the specications may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from MERCUSYS
TECHNOLOGIES CO., LIMITED. Copyright © 2020 MERCUSYS TECHNOLOGIES CO., LIMITED. All
rights reserved.
7107500142 REV1.0.1
Quick
Installation Guide
Powerline Adapter
For technical support, the user guide and more information, please visit
http://www.mercusys.com/support.
http://www.mercusys.com

Mercusys MP500 KIT Specifications

General

Type	Powerline Adapter
Model	MP500 KIT
Standard	HomePlug AV
Speed	500 Mbps
Interface	Ethernet
Plug Type	EU, UK, US
Encryption	128-bit AES
Data Rate	500 Mbps
Frequency	2-86 MHz
Modulation Technology	OFDM
Operating Frequency	50/60 Hz
Operating Humidity	10% to 90% non-condensing
Standards and Protocols	IEEE 1901, HomePlug AV
Button	Pair button
LED Indicator	Power, Ethernet, Powerline
Range	Up to 300 meters
Operating Voltage	100-240V
Operating Temperature	0°C to 40°C (32°F to 104°F)
System Requirements	Windows, Mac OS, Linux
Package Contents	Quick Installation Guide

Summary

Plug and Play

Attention

Secure the Powerline Network with the Pair Button

Set up a secure network

Press Pair button (1 sec) on one adapter, then within 2 minutes on another to pair them securely.

FAQ (Frequently Asked Questions)

How to reset powerline adapter

Press and hold the Pair button until the Power LED goes off momentarily and comes back on.

Troubleshoot no internet connection

Device does not reconnect after moving

EU Declaration of Conformity

Safety Information

MERCUSYS Three Years Limited Product Warranty