Mercusys MP500 KIT - Attention; Secure the Powerline Network with the Pair Button; Set up a secure network

English
2
Attention
• Plug the powerline devices directly into the wall outlets but not the power strips.
• For passthrough powerline devices, plug the power strips into the integrated
electrical sockets of the powerline devices.
Secure the Powerline Network with the Pair Button
Tips: We recommend that you plug in the powerline devices near each other when pairing.
Set up a secure network:
1
Press the Pair
button for 1
second on one
adapter.
2
Within 2 minutes,
press the Pair button
for 1 second on
another adapter.
3
Done.
A B
Quickly
Blinking
Solid
On
LED Status Indication
Solid On The powerline adapter is on.
O
The powerline adapter is o.
Or Power-Saving Mode is on.
Blinking
Blinking quickly: Pairing is in
process.
Blinking slowly: The powerline
adapter is not paired.