Mercusys MP500 KIT - FAQ (Frequently Asked Questions); How to reset powerline adapter

English
3
If you have more than 2 powerline devices, repeat the steps below on each
additional devices to be congured:
FAQ (Frequently Asked Questions)
Q1. How do I reset my powerline adapter?
A1. With the powerline adapter plugged into to the electrical outlet, press and hold
the Pair button until the Power LED goes o momentarily and comes back on.
1 Press the Pair button for 1
second on any powerline
device in the secure
network.
2 Within 2 minutes, press the
Pair button for 1 second
on the additional powerline
device.
3 Done.
A B
C
Quickly
Blinking
Solid On
Secure Network