Need help?Do you have a question about the Meridian 561 and is the answer not in the manual?
General| Channels | Up to 7.1 |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Weight | 8.5kg |
| Type | Controller |
| Surround Sound Formats | Dolby Digital, DTS |
| Control Protocol | RS232 |
| Power Supply | 100-240V, 50/60Hz |
| Power Output | Not applicable |
| Signal-to-Noise Ratio | >90dB |
| Inputs | Coaxial, Optical |
| Dimensions | 88mm x 480mm x 332mm (H x W x D) |
Details how to modify parameters for each DSP preset to customize sound.
Explains how to save modified settings as new user-defined presets.
Details rear panel connections for video, audio, and digital inputs/outputs.
Guidance on connecting Meridian DSP loudspeakers and other speaker systems.
How to connect digital and analogue audio sources to the 561.
Select from 39 alternative standard configurations (Types) for the 561.
Guide to the built-in calibration procedure for optimizing system settings.
Use Gain/Sub mode and configure sources for connected equipment.
Configuring speaker layout, number, and type using the program.
Modifying built-in DSP presets and creating custom user-defined presets.
Storing settings and performing calibration tests for optimal performance.
Saving calibrated settings as a named User Type.
Addresses issues like the standby light not illuminating or unexpected system behavior.
Addresses issues related to hum on analogue input and poor sound quality.
To Next Page
