Meridian Seed Express 275 DX

Questions and Answers

A
Andrew GrayAug 12, 2025
What to do if the engine will not start on my Meridian Seed Express 275 DX Farm Equipment?
- T
  Tony GallagherAug 12, 2025
  If the engine of your Meridian Farm Equipment won't start, several factors could be at play. First, ensure that the fuel tank is adequately filled. Next, check the engine oil level and fill the crankcase if it's low. For a cold engine, make sure to open the choke. Also, verify that the ignition key switch is turned on. If the battery is dead, recharge or replace it. If none of these steps work, the issue might be with the engine itself, and you should refer to the engine manual.
J
Joseph EllisAug 22, 2025
Why are the electrical or hydraulic functions not working properly on my Meridian Seed Express 275 DX?
- J
  Jason YatesAug 22, 2025
  If the electrical or hydraulic functions of your Meridian Farm Equipment aren't working correctly, begin by ensuring that the transmitter and receiver power are both turned on. Check the battery cable and ensure the battery is fully charged. Look at the LED Error Code light for any error indications. Verify that the electrical circuit has proper grounding. Confirm that the hydraulic pump is functioning correctly and the hydraulic tank is filled with oil. Finally, inspect the receiver antenna for damage and proper connection, and check for loose connectors at the valve coil if the function is intermittent.
C
cindyrichmondSep 1, 2025
How to troubleshoot a conveyor belt that will not start on Meridian Farm Equipment?
- R
  Robin GuzmanSep 1, 2025
  If the conveyor belt on your Meridian Farm Equipment won't start, first ensure the engine is running and the speed is above 1400 RPM to provide power. Check the drive motor coupling and repair or replace it if necessary. Increase the belt tension. Also, verify the hydraulic oil level; if it's low, check the oil level.